Gigabyte GA-K8NS Bedienungsanleitung PDF herunterladen (Seite 64)

GA-K8NS(rev. 2.0) Motherboard - 64 -

English

Using the "Define a New Array" Window

If necessary, press the tab key to move from field to field until the appropriate field is highlighted.

Selecting the RAID Mode

By default, this is set to Mirroring. To change to a different RAID mode, press the down arrow key until the

mode that you want appears in the RAID Mode box - either Mirroring, Striping, Spanning, or Stripe Mirroring.

Selecting the Striping Block Size

Striping block size is given in kilobytes, and affects how data is arranged on the disk. It is recommended to

leave this value at the default Optimal, which is 64KB, but the values can be between 4 KB and 128 KB.

Assigning the Disks

The disks that you enabled from the RAID Config BIOS setup page appear in the Free Disks block. These

are the drives that are available for use as RAID array disks. To designate a free disk to be used as a RAID

array disk,

1. Tab to the Free Disks section. The first disk in the list is selected.

2. Move it from the Free Disks block to the Array Disks block by pressing the rightarrow key (). The first disk

in the list is moved, and the next disk in the list is selected and ready to be moved.

3. Continue pressing the right-arrow key () until all the disks that you want to use as RAID array disks

appear in the Array Disks block.

NVIDIA RAID Utility May 10 2004

- Define a New Array -

RAID Mode: Mirroring Striping Block: Optimal

Free Disks

Loc Disk Model Name

Array Disks

Loc Disk Model Name

[



] Add

[



] Del

[F6] Back [F7] Finish [TAB] Navigate [



] Select [ENTER] Popup

1.0.M ST3120026AS

1.1.M ST3120026AS

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 79 80

Keine Kommentare

Gigabyte GA-K8NS Bedienungsanleitung Seite 64