Gigabyte GA-Z97X-SLI Bedienungsanleitung PDF herunterladen (Seite 27)

- 27 -

Hardware Installation

The front panel design may differ by chassis. A front panel module mainly consists of power switch,

reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis

front panel module to this header, make sure the wire assignments and the pin assignments are

matched correctly.

9) F_PANEL (Front Panel Header)

Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status indicator

on the chassis to this header according to the pin assignments below. Note the positive and negative pins

before connecting the cables.

• PW(PowerSwitch,Red):

 Connectstothepowerswitchonthechassisfrontpanel.Youmaycongurethewaytoturnoffyour

systemusing the powerswitch (refer to Chapter2, "BIOS Setup,""Power Management," formore

information).

• SPEAK(Speaker,Orange):

Connects to the speaker on the chassis front panel. The system reports system startup status by issuing

a beep code. One single short beep will be heard if no problem is detected at system startup. If a problem

is detected, the BIOS may issue beeps in different patterns to indicate the problem.

• HD(HardDriveActivityLED,Blue):

Connects to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive

is reading or writing data.

• RES(ResetSwitch,Green):

Connects to the reset switch on the chassis front panel. Press the reset switch to restart the computer

ifthecomputerfreezesandfailstoperformanormalrestart.

• CI(ChassisIntrusionHeader,Gray):

Connects to the chassis intrusion switch/sensor on the chassis that can detect if the chassis cover has

been removed. This function requires a chassis with a chassis intrusion switch/sensor.

Power LED

DEBUG

PORT

G.QBOFM

CI-

CI+

PWR_LED-

PWR_LED+

PLED-

PW-

SPEAK+

SPEAK-

PLED+

PW+

Power LED

HD-

RES+

HD+

RES-

Hard Drive

Activity LED

Reset

Switch

Chassis Intrusion

Header

Power Switch

Speaker

PWR_LED-

• PLED/PWR_LED (PowerLED,Yellow/Purple):

Connects to the power status indicator on the chassis front panel. The LED

is on when the system is operating. The LED is off when the system is in S3/

S4sleepstateorpoweredoff(S5).

System Status LED

S0 On

S3/S4/S5 Off

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 79 80

Kommentare zu diesen Handbüchern

Keine Kommentare

Gigabyte GA-Z97X-SLI Bedienungsanleitung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motherboards Gigabyte GA-Z97X-SLI