Gigabyte GA-6LXSV Bedienungsanleitung

GA-6LXSVLGA1150 socket motherboard for Intel® E3 series processorsUser's ManualRev. 1001

Hardware Installation - 10 -1-2 ProductSpecicationsCPU  Support for Intel® Xeon® E3-1200 family processors in the LGA1150 package  L3 cache vari

- 11 - Hardware InstallationInternal Connectors  1 x 24-pin ATX main power connector  1 x 8-pin ATX 12V power connector  2 x SATA 3Gb/s connectors

Hardware Installation - 12 -1-3 Installing the CPU and CPU Cooler1-3-1 Installing the CPUA. Locate the alignment keys on the motherboard CPU socket

- 13 - Hardware InstallationStep 1: Gently press the CPU socket lever handle down and away from the socket with your nger. Then completely lift the C

Hardware Installation - 14 -1-3-2 Installing the CPU CoolerFollow the steps below to correctly install the CPU cooler on the motherboard. (The follow

- 15 - Hardware Installation1-4-1 DualChannelMemoryCongurationThis motherboard provides four DDR3 memory sockets and supports Dual Channel Techno

Hardware Installation - 16 -1-4-2 Installing a Memory Before installing a memory module, make sure to turn off the computer and unplug the power cord

- 17 - Hardware Installation1-5 Back Panel ConnectorsUSB 2.0/1.1 PortThe USB port supports the USB 2.0/1.1 specication. Use this port for USB

Hardware Installation - 18 -LinkActivity LEDLinkActivity LEDLinkActivity LEDSpeed LED Speed LED Speed LED 10/100 LAN Port10/100/1000 LAN PortLink/Acti

- 19 - Hardware Installation1-6 Internal ConnectorsRead the following guidelines before connecting external devices:• First make sure your devices a

Copyright© 2013 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.The trademarks mentioned in this manual are legally registered to their respective

Hardware Installation - 20 -DEBUG PORTG.QBOFMP214581224113P1Pin No. Denition 13 3.3V 14 -12V 15 GND 16 PS_ON 17 GND 18 GND 19 GND 20 -5V 2

- 21 - Hardware Installation• Be sure to connect fan cables to the fan headers to prevent your CPU and system from overheating. Overheating may resul

Hardware Installation - 22 -Pin No. Denition 1 GND 2 TXP 3 TXN 4 GND 5 RXN 6 RXP 7 GNDSATA0SATA1SATA23SATA457777711111DEBUG PORTG.QBOFMDEBUG

- 23 - Hardware InstallationThe front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch, power LE

Hardware Installation - 24 -DEBUG PORTG.QBOFM1 29 1013) F_USB3_1 (USB 3.0 Header) The headers conform to USB 3.0 specication. Each USB header

- 25 - Hardware Installation15) COM2 (Serial Port Header) The COM header can provide one serial port via an optional COM port cable. For purchasing t

Hardware Installation - 26 -17) SGPIO (SATA SGPIO Header) SGPIO is stands for Serial General Purpose Input/Output which is a 4-signal (or 4-wire) bu

- 27 - Hardware Installation19) BMC_LED2 (BMC Firmware Readiness LED)State DescriptionOn BMC rmware is initialBlinking BMC rmware is readyOff Sys

Hardware Installation - 28 -22) JP2 (Case open intrusion header)Open: Active chassis intrustion alert.Closed: Normal operation.23) BAT (Battery) Th

- 29 - Hardware Installation25/26) J_MEUPDATE/J_HDA_SDO1 (ME Recover Jumpers)1-2 Close: Normal operation (Default setting)1-2 Close: ME recovery mode

- 3 -Table of ContentsBox Contents ...

Hardware Installation - 30 -28) J_BIOSRVCR (BIOS Recovery Jumper)1-2 Close: Normal operation. (Default setting)2-3 Close: BIOS recovery mode.27) J_P

- 31 - Hardware Installation29) J_S3MASK (S3 Power On Select Jumper) 30) PMBUS_SEL1 (PMBus Power Select Jumper) 11112-3 Close: Keep initial power on

Hardware Installation - 32 -31/32) SATA_DOM1/SATA_DOM2 (SATA port 0 and port 1 DOM Jumpers) SATA_DOM2SATA_DOM111CAUTION! • If the SATA DOM power is

- 33 - BIOS SetupBIOS (Basic Input and Output System) records hardware parameters of the system in the EFI on the motherboard. Its major functions inc

BIOS Setup - 34 - Main This setup page includes all the items in standard compatible BIOS. Advanced This setup page includes all the items of AMI

- 35 - BIOS Setup2-1 The Main MenuOnce you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move

BIOS Setup - 36 - BIOS Information BIOS Version Display version number of the BIOS setup utility. BIOS Build Date and Time Displays the date and t

- 37 - BIOS Setup2-2 Advanced MenuThe Advanced menu display submenu options for conguring the function of various hardware components. Select a subm

BIOS Setup - 38 -2-2-1 ACPIConguration ACPI Settings ACPI Sleep State Select the highest ACPI sleep state the system will enter, when the suspen

- 39 - BIOS Setup2-2-2 Trusted Computing (Optional) Conguration Security Device Support Select Enabled to activate TPM support feature. Options

- 4 -2-3-2-2 USBConguration ...742-3-3 Intel Server

BIOS Setup - 40 -2-2-3 PCI Subsystem Settings PCI Express Slot #1/2/3/4 I/O ROM When enabled, This setting will initialize the device expansion RO

- 41 - BIOS Setup PERR Generation When this item is set to enabled, PCI bus parity error (PERR) is generated and is routed to NMI. Options avail

BIOS Setup - 42 -2-2-3-1 PCI Express Settings PCI Express Device Register Settings Relaxed Ordering Enable/DIsable PCI Express Device Relaxed Ord

- 43 - BIOS Setup Link Training Retry Dene the number of Retry Attempts software wil take to retrain the link if previous training attempt was unsu

BIOS Setup - 44 -2-2-4 CPUConguration

- 45 - BIOS Setup CPUConguration CPU Type/ Signature / Microcode Patch / Max CPU Speed / Min CPU Speed / Processor Cores / Intel HT Technology

BIOS Setup - 46 - Overclocking lock Enable/Disable processor overcllocking lock function. Options available: Enabled/Disabled. Default setting i

- 47 - BIOS Setup The larger value in MSR_ENERGY_PERFORMANCE_BIAS register, CPU will save more power but lose more performance. Note: This registe

BIOS Setup - 48 - ACPI T State Enable/Disable ACPI T state support. Options available: Enabled/Disabled. Default setting is Disabled. CPU DTS

- 49 - BIOS Setup2-2-5 SATAConguration

- 5 -Box Contents GA-6LXSV motherboard Driver CD Two SATA cables I/O Shield• The box contents above are for reference only and the actual

BIOS Setup - 50 - SATA Controller(s) Enable/Disable the SATA controller. Options available: Enabled/Disabled. Default setting is Enabled. SATA M

- 51 - BIOS Setup2-2-5-1SoftwareFeatureMaskConguration RAID 0 Enable/Disable RAID 0 feature. Options available: Enabled/Disabled. Default se

BIOS Setup - 52 - HDD Unlock When this item is enabled, the HDD password unlock in the OS is enabled. Options available: Enabled/Disabled. Default

- 53 - BIOS Setup2-2-6 InfoReportConguration InfoReportConguration Post Report Enable/Disable Post Report support. Options available: Enabl

BIOS Setup - 54 -2-2-7 USBConguration Legacy USB Support Enables or disables support for legacy USB devices. Options available: Auto/Enabled

- 55 - BIOS Setup2-2-8 SuperIOConguration

BIOS Setup - 56 - Super IO Chip Display the model name of Super IO chip. SerialPort0/1Conguration Serial Port When enabled allows you t

- 57 - BIOS Setup2-2-9 Serial Port Console Redirection

BIOS Setup - 58 -(Note) Advanced items prompt when this item is dened. COM1/COM2/Serial Port for Out-of Band Management / Windows Emergency Ma

- 59 - BIOS Setup(Note) Advanced items prompt when this item is dened. Legacy OS Redirection Resolution (Note) On Legacy OS, the number of Rows

- 6 -GA-6LXSV Motherboard Layout1 2 3 4 65 789101112131415162425372627303132333839404142434445 464748 495051 5253181920283435362921222317

BIOS Setup - 60 -2-2-10 Network Stack Network stack Enable/Disable UEFI network stack. Options available: Enabled/DIsabled. Default setting is

- 61 - BIOS Setup2-2-11 iSCSIConguration iSCSI Initiator Name Add an Attempts Press [Enter] for conguration of advanced items. Delete Attempt

BIOS Setup - 62 -2-2-12 Intel (R) I210 Gigabit Network Connection

- 63 - BIOS Setup PORT CONFIGURATION MENU NICConguration Link Speed Change link speed duplex for current port. Options available: AutoNeg/1

BIOS Setup - 64 -2-3 Chipset MenuThe Chipset menu display submenu options for conguring the function of North Bridge and South Bridge. Select a subm

- 65 - BIOS Setup2-3-1 SystemAgent(SA)Conguration System Agent Bridge Name Display the System Agent (SA) Bridge Name. System Agent RC Version

BIOS Setup - 66 -2-3-1-1GraphicConguration GraphicConguration Primary Display Device Congure the Primary display device. Options available:

- 67 - BIOS Setup2-3-1-2NBPCIeConguration NBPCIeConguration PEG0 Display PEG0 conguration information. PEG0 - Gen X Congure PEG0 B0:D1:F0

BIOS Setup - 68 - PEG0 De-emphasis Control PEG0:Congure the De-emphasis control on PEG. Options available: Options available: -6 dB/-3.5 dB. Defa

- 69 - BIOS Setup2-3-1-3MemoryConguration Memory Information Memory RC Version Display version number of installed memeory. Memory Frequency

- 7 -Item Code Description1 ID_SW1 ID Switch button2 MLAN1 BMC Management LAN port3 USB3_LAN1 LAN1 port (top) / USB 3.0 ports (bottom)4USB3_LAN2 LAN2

BIOS Setup - 70 - Memory Frequency Limiter Maximum Memory Frequency Selections in Mhz. Options available: Auto/1067/1333/1600/1867/2133/2400/2667.

- 71 - BIOS Setup2-3-2 PCH-IOConguration Intel PCH RC Version/Intel PCH SKU/Intel PCH Rev ID Information Displays the RC version, SKU and Reveriso

BIOS Setup - 72 - Restore AC Power Loss This option provides user to set the mode of operation if an AC / power loss occurs. Power On: System

- 73 - BIOS Setup2-3-2-1PCIExpressConguration PCI Express Clock Gating Enable/Disable PCI Express Clock Gating for each root port. Options ava

BIOS Setup - 74 -2-3-2-2USBConguration USBConguration USB Precondition Precondition work on USB host controller and root ports for faster enum

- 75 - BIOS Setup2-3-3 Intel Server Platform Services Intel Server Platform Services Enable/Disable Intel Server Platform Services Help. Options

BIOS Setup - 76 -There are two types of passwords that you can set:• Administrator Password Entering this password will allow the user to access a

- 77 - BIOS Setup2-4-1 Secure Boot menu The Secure Boot Menu is applicable when your device is installed the Windows® 8 operatin system. Platf

BIOS Setup - 78 - Image Execution policy Internal FV Image Execution Policy per device path on Security Violation. Options available: Always Execu

- 79 - BIOS Setup Key Management This item appears only when the Secure Boot Mode is set to Custom. Factory Default Key Provisioning Force the sy

- 8 -35 SATA_DOM1 SATA port 0 DOM support jumper.36 J_HDA_SDO1 ME recovery jumper37 U7 Intel C224 Chipest38 F_USB1 USB 2.0 header39 BP_1 Back plane bo

BIOS Setup - 80 - Set new KEK Press [Enter] to congure a new KEK. Append Var to KEK Press [Enter] to load additional KEK from a storage devices

- 81 - BIOS Setup2-5 Server Management Menu BMCLANConguration BMC LAN Conguration. Press Enter to access the related submenu. Gbt BMC Funct

BIOS Setup - 82 - Lan Channel 1 CongurationSource Select to congure LAN channel parameters statically or dynamically (DHCP). Do nothing opti

- 83 - BIOS Setup2-5-2 Gbt BMC Function Select NCSI and Dedicated LAN Switch NCSI and dedicated LAN and send KCS command. Options available: Mo

BIOS Setup - 84 -2-5-3 View FRU InformationThe FRU Information menu is a simple display page for basic system ID information, as well as System produ

- 85 - BIOS Setup2-5-4 System Event Log Enabling/Disabling Options Smbios Event Log Choose options to Enable/Disable logging of System boot event.

BIOS Setup - 86 -2-6 Event Logs Menu Change Smbios Event Log Settings Press [Enter] for conguration of advanced items. View Smbios Event Log Pre

- 87 - BIOS Setup2-6-1 Change Smbios Event Log Settings Enabling/Disabling Options SEL Components Change this to enable or disable all features of

BIOS Setup - 88 - METW Multiple Event Time Window: The number of minutes which must pass between duplicate log entries which utilize a multi

- 89 - BIOS Setup2-6-2 View Smbios Event LogThe Smbios Event Log is a display page of Smbios Event Log information. Items on this window are non-con

- 9 - Hardware Installation1-1 Installation PrecautionsThe motherboard contains numerous delicate electronic circuits and components which can become

BIOS Setup - 90 -2-7 Boot MenuThe Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if t

- 91 - BIOS Setup Network Device BBS Priorities Press Enter to congure the boot priority. Hard Drive BBS Priorities Press Enter to congure th

BIOS Setup - 92 -2-7-1 CSM16 Parameters CSM16 Module Version Display CSM Module version information. Gate20 Active Upon Request: GA20 can be dis

- 93 - BIOS Setup2-7-2 CSM Parameters CSM parameters Press Enter to congure the advanced items. Launch CSM (Compatibility Support Module) Ena

BIOS Setup - 94 - Other PCI device ROM priority For PCI devices other than Network, Mass storage or Video device, denes which OpROM to launch. Opt

- 95 - BIOS Setup2-8 Exit MenuThe Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then press En

Appendix - 96 -Chapter 3 Appendix3-1 Regulatory StatementsRegulatory NoticesThis document must not be copied without our written permission, and the

- 97 - AppendixFinally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of t