Gigabyte GN-B41G Bedienungsanleitung PDF herunterladen (Seite 78)

GN-B41G Wireless Broadband Router

Chapter 8 Troubleshooting

This sections provides solutions to common problems that may occur during

installation, configuration or use of the GN-B41G.

Q: I can’t remember the password or IP address of the router.

A: You can create a new new password by pressing the “Init” button on the

bottom of the router. The Router will reboot and all settings will be

restored to their default values.

Q: I can’t connect to the Internet

A: 1. Check that the power cord is connected properly, and the router’s

power LED is lit green.

2. Verify that all the configuration settings are correct.

3. Check that your ADSL/Cable Modem is operating normally, and/or

you have ISP service available.

4. Check that all network cabling is properly connected.

Q: I can’t access the GN-B41G Web Configuration Utility.

A: 1. Please check the Ethernet between the PC and the Router is

properly connected.

2. Make sure your computer’s IP address is on the subnet where the

Router locates.

3. Make sure you are using the correct login information.

Q: Where in the network do I connect the router?

A: In a typical environment, the GN-B41G is installed between ADSL/Cable

Modem and LAN. Plug the Router into the Ethernet port of ADSL or Cable

Modem.

Q: Can the GN-B41G work as a DHCP server?

A: Yes. GN-B41G has a built-in DHCP server function so that apart from all

the standard DHCP functions, it helps prevent IP conflicts.

Q: What is WEP?

A: Wired Equivalent Privacy (WEP) is a security mechanism defined within

the 802.11 standard. It is designed to make the link integrity of the

wireless medium equal to wired cable. Data privacy mechanism based on

a 40 bits (128 bit optional) shared key algorithm, as described in the IEEE

802.11 standard.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 84

Keine Kommentare

Gigabyte GN-B41G Bedienungsanleitung Seite 78