Gigabyte GA-H61M-USB3-B3 Bedienungsanleitung PDF herunterladen (Seite 30)

BIOS Setup - 30 -

On-Chip Frame Buffer Size

Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con-

troller. MS-DOS, for example, will use only this memory for display. Options are:32MB+2MB for GTT~

480MB+2MB for GTT. (Default: 64MB+2MB for GTT)

2-6 Integrated Peripherals

Integrated Peripherals

SATA AHCI Mode [IDE]

SATA Port0-1 Native Mode [Enabled]

USB Controllers [Enabled]

USB Legacy Function [Enabled]

USB Storage Function [Enabled]

Azalia Codec [Auto]

Onboard H/W LAN [Enabled]



SMART LAN [Press Enter]

Onboard LAN Boot ROM [Disabled]

Onboard USB 3.0 Controller [Enabled]

Onboard Serial Port 1 [3F8/IRQ4]

Onboard Parallel Port [378/IRQ7]

Parallel Port Mode [SPP]



: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Item Help

Menu Level



SATA AHCI Mode (Intel H61 Chipset)

Allows you to decide whether to congure the SATA controller integrated in the Intel H61 Chipset to AHCI

mode.

IDE Congures the SATA controller to IDE mode. (Default)

AHCI Congures the SATA controller to AHCI mode. Advanced Host Controller Interface

(AHCI) is an interface specication that allows the storage driver to enable advanced

Serial ATA features such as Native Command Queuing and hot plug.

SATA Port0-1 Native Mode (Intel H61 Chipset)

Species the operating mode of the integrated SATA controllers.

Disabled Allows the SATA controllers to operate in Legacy IDE mode.

In Legacy mode the SATA controllers use dedicated IRQs that cannot be shared with

other device. Set this option to Disabled if you wish to install operating systems that

do not support Native mode.

Enabled

Allows the SATA controllers to operate in Native IDE mode. Enable Native IDE mode if you

wish to install operating systems that support Native mode.

(Default)

USB Controllers

Enables or disables the integrated USB controller. (Default: Enabled)

Disabled will turn off all of the USB functionalities below.

USB Legacy Function

Allows USB keyboard to be used in MS-DOS. (Default: Enabled)

USB Storage Function

Determines whether to detect USB storage devices, including USB ash drives and USB hard drives

during the POST. (Default: Enabled)

Azalia Codec

Enables or disables the onboard audio function. (Default: Auto)

If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to

Disabled.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Gigabyte GA-H61M-USB3-B3 Bedienungsanleitung Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motherboards Gigabyte GA-H61M-USB3-B3