Gigabyte GA-EP45-UD3P Bedienungsanleitung

GA-EP45-UD3PLGA775 socket motherboard for Intel® CoreTM processor family/Intel® Pentium® processor family/Intel® Celeron® processor familyUser's

GA-EP45-UD3P Motherboard - 10 -1-2 Product SpecificationsCPU  Support for an Intel® CoreTM 2 Extreme processor/Intel® CoreTM 2 Quad processor/Intel®

GA-EP45-UD3P Motherboard - 100 -Copying the SATA RAID/AHCI driver from the motherboard driver disk to a USB flash driveStep 1:On an alternative system

Appendix- 101 -Figure 1Figure 2Step 2:When a screen similar to that below appears, insert the floppy disk containing the SATA RAID/AHCIdriver and pres

GA-EP45-UD3P Motherboard - 102 -Step 3:For Intel ICH10R SATA controllers:When Setup correctly recognizes the Intel ICH10R SATA RAID/AHCI driver in the

Appendix- 103 -Step 3:For GIGABYTE SATA2 SATA controller:When Setup correctly recognizes the GIGABYTE SATA2 SATA RAID/AHCI driver in the floppy disk,

GA-EP45-UD3P Motherboard - 104 -Step 4:After the SATA RAID/AHCI driver installation is completed, you can proceed with the Windows XPinstallation.Figu

Appendix- 105 -B. Installing Windows Vista(The procedure below assumes that only one RAID array exists in your system.)Intel ICH10R SATA controllers:S

GA-EP45-UD3P Motherboard - 106 -Figure 10(Note) The item displayed in Figure 10 will be shown as Intel(R) ICH10R SATA AHCI Controllerwhen the SATA con

Appendix- 107 -GIGABYTE SATA2 controllers:Step 1:Restart your system to boot from the Windows Vista setup disk and perform standard OS installationste

GA-EP45-UD3P Motherboard - 108 -Figure 14Step 3:When a screen as shown in Figure 14 appears, select GIGABYTE GBB36X Controller and pressNext.Step 4:Af

Appendix- 109 -5-2 Configuring Audio Input and Output5-2-1 Configuring 2/4/5.1/7.1-Channel AudioThe motherboard provides six audio jacks on theback pa

Hardware Installation- 11 -USB  Integrated in the South Bridge Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB bracketsconnected to t

GA-EP45-UD3P Motherboard - 110 -Step 2:Click the Audio I/O tab. In the speaker list on theleft, select 2CH Speaker, 4CH Speaker, 6CHSpeaker, or 8CH Sp

Appendix- 111 -5-2-2 Installing the S/PDIF In Cable (Optional)The S/PDIF in cable provides S/PDIF in functionality.Step 1:First, attach the connector

GA-EP45-UD3P Motherboard - 112 -C. Configuring S/PDIF out:Click the tool icon in the DIGITAL section. In theS/PDIF In/Out Settings dialog box, select

Appendix- 113 -5-2-3 Enabling the Dolby Home Theater FunctionBefore Dolby Home Theater is enabled, you get only 2-channel playback output (from thefro

GA-EP45-UD3P Motherboard - 114 -5-2-4 Configuring Microphone RecordingStep 2:Connect your microphone to the Mic in jack (pink)on the back panel or the

Appendix- 115 -(Note)If you cannot find the volume control options youneed in Master Volume, go to the Options menuand then choose Properties. Select

GA-EP45-UD3P Motherboard - 116 -Step 6:To raise the recording and playing sound for themicrophone, go to Options in Master Volume andselect Advanced C

Appendix- 117 -5-3 Troubleshooting5-3-1 Frequently Asked QuestionsTo read more FAQs for your motherboard, please go to the Support\Motherboard\FAQ pag

GA-EP45-UD3P Motherboard - 118 -5-3-2 Troubleshooting ProcedureIf you encounter any troubles during system startup, follow the troubleshooting procedu

Appendix- 119 -If the procedure above is unable to solve your problem, contact the place of purchase or localdealer for help. Or go to the Support\Tec

GA-EP45-UD3P Motherboard - 12 -BIOS  2 x 8 Mbit flash Use of licensed AWARD BIOS Support for DualBIOSTM PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0bU

GA-EP45-UD3P Motherboard - 120 -5-4 Regulatory StatementsRegulatory NoticesThis document must not be copied without our written permission, and the co

Appendix- 121 -Finally, we suggest that you practice other environmentally friendly actions by understanding andusing the energy-saving features of th

GA-EP45-UD3P Motherboard - 122 -

Appendix- 123 -

GA-EP45-UD3P Motherboard - 124 -

Appendix- 125 -

GA-EP45-UD3P Motherboard - 126 -

Appendix- 127 -Contact Usyyyyy GIGA-BYTE TECHNOLOGY CO., LTD.Address: No.6, Bau Chiang Road, Hsin-Tien,Taipei 231, Taiwan TEL: +886-2-8912-4888 FAX: +

GA-EP45-UD3P Motherboard - 128 -To submit a technical or non-technical (Sales/Marketing) question, please link to :http://ggts.gigabyte.com.twThen sel

Hardware Installation- 13 -1-3 Installing the CPU and CPU CoolerRead the following guidelines before you begin to install the CPU:• Make sure that the

GA-EP45-UD3P Motherboard - 14 -Step 5:Once the CPU is properly inserted, replacethe load plate and push the CPU socket leverback into its locked posit

Hardware Installation- 15 -1-3-2 Installing the CPU CoolerFollow the steps below to correctly install the CPU cooler on the motherboard. (The followin

GA-EP45-UD3P Motherboard - 16 -1-4 Installing the MemoryRead the following guidelines before you begin to install the memory:• Make sure that the moth

Hardware Installation- 17 -1-4-2 Installing a MemoryNotchBefore installing a memory module , make sure to turn off the computer and unplugthe power co

GA-EP45-UD3P Motherboard - 18 -1-5 Installing an Expansion CardRead the following guidelines before you begin to install an expansion card:• Make sure

Hardware Installation- 19 -1-6 Installing the SATA BracketThe SATA bracket includes one SATA bracket, oneSATA signal cable, and one SATA power cable.S

Sept. 15, 2008MotherboardGA-EP45-UD3PMotherboardGA-EP45-UD3PSept. 15, 2008

GA-EP45-UD3P Motherboard - 20 -• When removing the cable connected to a back panel connector, first remove the cablefrom your device and then remove i

Hardware Installation- 21 -Center/Subwoofer Speaker Out Jack (Orange)Use this audio jack to connect center/subwoofer speakers in a 5.1/7.1-channel aud

GA-EP45-UD3P Motherboard - 22 -1-8 Internal ConnectorsRead the following guidelines before connecting external devices:• First make sure your devices

Hardware Installation- 23 -13124121/2) ATX_12V_2X4/ATX (2x4 12V Power Connector and 2x12 Main Power Connector)With the use of the power connector, the

GA-EP45-UD3P Motherboard - 24 -• Be sure to connect fan cables to the fan headers to prevent your CPU and system fromoverheating. Overheating may resu

Hardware Installation- 25 -7) IDE (IDE Connector)The IDE connector supports up to two IDE devices such as hard drives and optical drives. Beforeattach

GA-EP45-UD3P Motherboard - 26 -10) PWR_LED (System Power LED Header)This header can be used to connect a system power LED on the chassis to indicate s

Hardware Installation- 27 -11) F_PANEL (Front Panel Header)Connect the power switch, reset switch, speaker and system status indicator on the chassis

GA-EP45-UD3P Motherboard - 28 -12) F_AUDIO (Front Panel Audio Header)The front panel audio header supports Intel High Definition audio (HD) and AC&apo

Hardware Installation- 29 -14) SPDIF_I (S/PDIF In Header, Red)This header supports digital S/PDIF in and can connect to an audio device that supports

Copyright© 2008 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.The trademarks mentioned in this manual are legally registered to their respective

GA-EP45-UD3P Motherboard - 30 -17) F1_1394 (IEEE 1394a Header, Gray)The header conforms to IEEE 1394a specification. The IEEE 1394a header can provide

Hardware Installation- 31 -18) LPT (Parallel Port Header)The LPT header can provide one parallel port via an optional LPT port cable. For purchasing t

GA-EP45-UD3P Motherboard - 32 -20) CI (Chassis Intrusion Header)This motherboard provides a chassis detection feature that detects if the chassis cove

Hardware Installation- 33 -23) PHASE LEDThe number of lighted LEDs indicates the CPU loading. The higher the CPU loading, the more thenumber of lighte

GA-EP45-UD3P Motherboard - 34 -

- 35 - BIOS SetupChapter 2 BIOS SetupBIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on themotherboard. Its

GA-EP45-UD3P Motherboard - 36 -2-1 Startup ScreenThe following screens may appear when the computer boots.A. The LOGO Screen (Default)B. The POST Scre

- 37 - BIOS Setup2-2 The Main MenuOnce you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Usearrow keys to move a

GA-EP45-UD3P Motherboard - 38 - The Functions of the <F11> and <F12> keys (For the Main Menu Only)` F11 : Save CMOS to BIOSThis fun

- 39 - BIOS Setup2-3 MB Intelligent Tweaker(M.I.T.)(Note 1) This item appears only if you install a CPU that supports this feature.(Note 2) This item

- 4 -Table of ContentsBox Contents ... 6

GA-EP45-UD3P Motherboard - 40 -Robust Graphics BoosterRobust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip andmemory

- 41 - BIOS SetupCPU Host Frequency (Mhz)Allows you to manually set the CPU host frequency. This item is configurable only if the CPUHost Clock Contro

GA-EP45-UD3P Motherboard - 42 -CPU Clock DriveAllows you to adjust the amplitude of the CPU and North Bridge clock.Options are: 700mV, 800mV (default)

- 43 - BIOS Setup>>>>> Standard Timing ControlCAS Latency TimeOptions are: Auto (default), 3~7.tRCDOptions are: Auto (default), 1~15.

GA-EP45-UD3P Motherboard - 44 ->>>>> Channel A/BChannel A/B Timing SettingsStatic tRead ValueOptions are: Auto (default), 1~15.tRD Ph

- 45 - BIOS SetupDriving Strength ProfileOptions are: Auto (default), 667MHz, 800MHz, 1066MHz, OC-1200, OC-1333.Data Driving Pull-Up LevelOptions are:

GA-EP45-UD3P Motherboard - 46 -******** Mother Board Voltage Control ********>>> CPULoad-Line CalibrationEnables or disables Load-Line

- 47 - BIOS Setup2-4 Standard CMOS FeaturesDateSets the system date. The date format is week (read-only), month, date and year. Select thedesired fiel

GA-EP45-UD3P Motherboard - 48 -• Auto Lets BIOS automatically detect IDE/SATA devices during the POST. (Default)• None If no IDE/SATA devices are us

- 49 - BIOS Setup2-5 Advanced BIOS FeaturesCMOS Setup Utility-Copyright (C) 1984-2008 Award SoftwareAdvanced BIOS Features` Hard Disk Boot Priority [P

- 5 -Chapter 3 Drivers Installation ... 653-1 Installing Chipset Dr

GA-EP45-UD3P Motherboard - 50 -(Note) This item is present only if you install a CPU that supports this feature. For more informationabout Intel CPUs&

- 51 - BIOS SetupDelay For HDD (Secs)Allows you to set a delay time for the BIOS to initialize the hard drive as the system boots up. Theadjustable ra

GA-EP45-UD3P Motherboard - 52 -2-6 Integrated PeripheralsSATA RAID/AHCI Mode (Intel ICH10R Southbridge)Enables or disables RAID for the SATA controlle

- 53 - BIOS SetupSATA Port0-3 Native ModeSpecifies the operating mode of the integrated SATA controllers.Disabled Allows the SATA controllers to opera

GA-EP45-UD3P Motherboard - 54 -Start detecting at Port...Link Detected --> 100MbpsCable Length= 30mLink Detected Displays transmission speedCable

- 55 - BIOS SetupOnboard LAN1/LAN2 Boot ROMAllows you to decide whether to activate the boot ROM integrated with the onboard LAN chip.(Default: Disabl

GA-EP45-UD3P Motherboard - 56 -2-7 Power Management SetupCMOS Setup Utility-Copyright (C) 1984-2008 Award SoftwarePower Management SetupACPI Suspend T

- 57 - BIOS SetupResume by AlarmDetermines whether to power on the system at a desired time. (Default: Disabled)If enabled, set the date and time as f

GA-EP45-UD3P Motherboard - 58 -2-8 PnP/PCI ConfigurationsPCI1 IRQ AssignmentAuto BIOS auto-assigns IRQ to the first PCI slot. (Default)3,4,5,7,9,10,11

- 59 - BIOS Setup2-9 PC Health StatusReset Case Open StatusKeeps or clears the record of previous chassis intrusion status. Enabled clears the record

- 6 -Box ContentsGA-EP45-UD3P motherboardMotherboard driver diskUser's ManualQuick Installation GuideOne IDE cable and one floppy disk drive cabl

GA-EP45-UD3P Motherboard - 60 -CPU Smart FAN ControlEnables or disables the CPU fan speed control function. Auto lets the BIOS decide whether toenable

- 61 - BIOS Setup2-10 Load Fail-Safe DefaultsPress <Enter> on this item and then press the <Y> key to load the safest BIOS default setting

GA-EP45-UD3P Motherboard - 62 -2-12 Set Supervisor/User PasswordCMOS Setup Utility-Copyright (C) 1984-2008 Award Software` MB Intelligent Tweaker(M.I.

- 63 - BIOS Setup2-13 Save & Exit Setup2-14 Exit Without SavingCMOS Setup Utility-Copyright (C) 1984-2008 Award Software` MB Intelligent Tweaker(M

GA-EP45-UD3P Motherboard - 64 -2-15 Security Chip Configuration (Note)Security ChipEnables or disables the security chip. It is recommended that you u

Drivers Installation- 65 -Chapter 3 Drivers Installation3-1 Installing Chipset Drivers• Before installing the drivers, first install the operating sys

GA-EP45-UD3P Motherboard - 66 -3-2 Application SoftwareThis page displays all the utilities and applications that GIGABYTE develops and some free soft

Drivers Installation- 67 -3-4 ContactClick the URL on this page to link to the GIGABYTE Web site. Or read the last page of this manual to checkthe con

GA-EP45-UD3P Motherboard - 68 -3-6 Download CenterTo update the BIOS, drivers, or applications, click the Download Center button to link to the GIGABY

Unique Features- 69 -4-1 Xpress Recovery2"*" Xpress Recovery2 checks the first physical hard drive in the following sequence: The first PAT

- 7 -GA-EP45-UD3P Motherboard Layout(Note) This feature is optional due to different regional policy.KB_MSCPU_FANLGA775ATXGA-EP45-UD3PF_AUDIOATX_12V_2

GA-EP45-UD3P Motherboard - 70 -Figure 1Figure 33. Select a file system (for example, NTFS) and begin the installation of the operating system (Figure

Unique Features- 71 -5. If your hard drive is not properly partitioned before you install the operating system, you maycreate new partitions using fre

GA-EP45-UD3P Motherboard - 72 -C. Using the Backup Function in Xpress Recovery21. Select BACKUP to start backing up your hard drive data (Figure 10).2

Unique Features- 73 -E. Removing the Backup1. If you wish to remove the backup file, select REMOVE (Figure 15).2. After the backup file is removed, no

GA-EP45-UD3P Motherboard - 74 -4-2-1 Updating the BIOS with the Q-Flash UtilityA. Before You Begin:1. From GIGABYTE's website, download the lates

Unique Features- 75 -B. Updating the BIOSWhen updating the BIOS, choose the location where the BIOS file is saved. The follow procedureassumes that yo

GA-EP45-UD3P Motherboard - 76 -Step 6:Select Save & Exit Setup and then press <Y> to save settings to CMOS and exit BIOS Setup. Theprocedure

Unique Features- 77 -4-2-2 Updating the BIOS with the @BIOS UtilityA. Before You Begin:1. In Windows, close all applications and TSR (Terminate and St

GA-EP45-UD3P Motherboard - 78 -4-3 EasyTune 6GIGABYTE's EasyTune 6 is a simple and easy-to-use interface that allows users to fine-tune theirsyst

Unique Features- 79 -4-4 Dynamic Energy Saver AdvancedGIGABYTE Dynamic Energy Saver Advanced (Note 1) is a revolutionary technology that delivers unpa

- 8 -Block Diagram(Note) This feature is optional due to different regional policy.1 PCI Express x81 PCI Express x16LGA775ProcessorHostInterfaceIntel®

GA-EP45-UD3P Motherboard - 80 -Total Mode - Button Information TableB. Total ModeIn Total Mode, users are able to see how much total power savings the

Unique Features- 81 -4-5 Ultra TPM (Note 1)GIGABYTE's unique Ultra TPM (Trusted Platform Module) features the industry's most advanced hardw

GA-EP45-UD3P Motherboard - 82 -4-6 Q-ShareQ-Share is an easy and convenient data sharing tool. After configuring your LAN connection settingsand Q-Sha

Unique Features- 83 -4-7 Time RepairBased on the Microsoft Volume Shadow Copy Services technology, Time Repair allows you toquickly back up and restor

GA-EP45-UD3P Motherboard - 84 -4-8 TeamingDual LAN with Teaming functionality enabled on this motherboard allows two single connections to act asone s

Unique Features- 85 -B. Enabling Teaming Functionality in Windows Vista:Step 1:Insert the motherboard driver disk and select Appli-cation Software, In

GA-EP45-UD3P Motherboard - 86 -

Appendix- 87 -(Note 1) Skip this step if you do not want to create RAID array on the SATA controller.(Note 2) Required when the SATA controller is set

GA-EP45-UD3P Motherboard - 88 -B. Configuring SATA controller mode in BIOS SetupMake sure to configure the SATA controller mode correctly in system BI

Appendix- 89 -C. Configuring a RAID array in RAID BIOSEnter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed to the i

Hardware Installation- 9 -1-1 Installation PrecautionsThe motherboard contains numerous delicate electronic circuits and components which can becomeda

GA-EP45-UD3P Motherboard - 90 -Step 3:After entering the CREATE VOLUME MENU screen, enter a volume name with 1~16 letters (letterscannot be special ch

Appendix- 91 -Step 5:Enter the array capacity and press <Enter>. Finally press <Enter> on the Create Volume item to begincreating the RAID

GA-EP45-UD3P Motherboard - 92 -Delete RAID VolumeTo delete a RAID array, select Delete RAID Volume in MAIN MENU and press <Enter>. In theDELETE

Appendix- 93 -5-1-2 Configuring GIGABYTE SATA2 SATA ControllerA. Installing SATA hard drive(s) in your computerAttach one end of the SATA signal cable

GA-EP45-UD3P Motherboard - 94 -C. Configuring a RAID array in RAID BIOSEnter the RAID BIOS setup utility to configure a RAID array. Skip this step and

Appendix- 95 -Figure 5Create a RAID Array:In the main screen, press <Enter> on the Create RAID Disk Drive item. Then the Create New RAIDscreen a

GA-EP45-UD3P Motherboard - 96 -Figure 63. Assign Array Disks: After a RAID mode is selected, RAID BIOS automatically assigns the twohard drives insta

Appendix- 97 -When finished, the new RAID array will be displayed in the RAID Disk Drive List block (Figure 8).Figure 8GIGABYTE Technology Corp. PCIE-

GA-EP45-UD3P Motherboard - 98 -7. Save and Exit Setup: After configuring the RAID array, select the Save And Exit Setup item in themain screen to save

Appendix- 99 -5-1-3 Making a SATA RAID/AHCI Driver Diskette(Required for AHCI and RAID Mode)To successfully install operating system onto SATA hard dr