Gigabyte GA-880GM-D2H Bedienungsanleitung PDF herunterladen (Seite 38)

BIOS Setup - 38 -

CPU Clock Ratio

Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU

being used.

CPU NorthBridge Freq.

(Note)

Allows you to alter the North Bridge controller frequency for the installed CPU. The adjustable range is

dependent on the CPU being used.

CPU Host Clock Control

Enables or disables the control of CPU host clock. Auto (default) allows the BIOS to automatically adjust

the CPU host frequency. Manual allows the CPU Frequency (MHz) item below to be congurable.

Note: If your system fails to boot after overclocking, please wait for 20 seconds to allow for automated

system reboot, or clear the CMOS values to reset the board to default values.

CPU Frequency(MHz)

Allows you to manually set the CPU host frequency. The adjustable range is from 200 MHz to 500 MHz.

This option is congurable only when CPU Host Clock Control is set to Manual.

Important It is highly recommended that the CPU frequency be set in accordance with the CPU speci-

cations.

PCIE Clock(MHz)

Allows you to manually set the PCIe clock frequency. The adjustable range is from 100 MHz to 200 MHz.

Auto sets the PCIe clock frequency to standard 100 MHz. (Default: Auto)

HT Link Width

Allows you to manually set the width for the HT Link between the CPU and chipset.

Auto BIOS will automatically adjust the HT Link Width. (Default)

8 bit Sets HT Link Width to 8 bit.

16 bit Sets HT Link Width to 16 bit.

HT Link Frequency

Allows you to manually set the frequency for the HT Link between the CPU and chipset.

Auto BIOS will automatically adjust the HT Link Frequency. (Default)

200 MHz~2.6 GHz Sets HT Link Frequency to 200 MHz~2.6 GHz.

Set Memory Clock

Determines whether to manually set the memory clock. Auto lets BIOS automatically set the memory

clock as required. Manual allows the memory clock control item below to be congurable. (Default: Auto)

Memory Clock

This option is congurable only when Set Memory Clock is set to Manual.

X4.00 Sets Memory Clock to X4.00.

X5.33 Sets Memory Clock to X5.33.

X6.66 Sets Memory Clock to X6.66.

X8.00 Sets Memory Clock to X8.00

(Note) This item appears only if you install a CPU that supports this feature.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 99 100

Keine Kommentare

Gigabyte GA-880GM-D2H Bedienungsanleitung Seite 38