GA-790XT-USB3AM3 socket motherboard for AMD Phenom™ II processor/AMD Athlon™ II processorUser's ManualRev. 100112ME-790XTU3-1001R
Hardware Installation - 10 -1-2 Product Specications CPU Support for AM3 processors: AMD Phenom™ II processor/ AMD Athlon™ II pro
Appendix - 100 -(Note) The actual locations of the SPDIF In and SPDIF Out connectors may differ by model.5-2-2 Conguring S/PDIF In/OutA. S/PDIF InT
- 101 - AppendixB. S/PDIF OutThe S/PDIF Out jacks can transmit audio signals to an external decoder for decoding to get the best audio quality.1. Conn
Appendix - 102 -5-2-3 Conguring Microphone RecordingStep 1:After installing the audio driver, the HD Audio Manager icon will appear in the notica
- 103 - AppendixStep 4:To raise the recording and playback volume for the microphone, click the Microphone Boost icon on the right of the
Appendix - 104 -Step 3:When the Stereo Mix item appears, right-click on this item and select Enable. Then set it as the default de-vice.Step 4:Now
- 105 - Appendix5-3 Troubleshooting5-3-1 Frequently Asked Questions To read more FAQs for your motherboard, please go to the Support&Downloads\M
Appendix - 106 -5-3-2 Troubleshooting ProcedureIf you encounter any troubles during system startup, follow the troubleshooting procedure below to sol
- 107 - AppendixThe power supply, CPU or CPU socket might fail.The keyboard or keyboard connector might fail.ENDATurn off the computer. Plug in the k
Appendix - 108 -5-4 Regulatory StatementsRegulatory NoticesThis document must not be copied without our written permission, and the content
- 109 - AppendixFinally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of
- 11 - Hardware Installation USB Chipset: - Up to 10 USB 2.0/1.1 ports (6 on the back panel, 4 via the USB brackets
Appendix - 110 -
- 111 - AppendixContact Us• GIGA-BYTE TECHNOLOGY CO., LTD.Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei 231, Taiwan TEL: +886-2-8912-4000 FAX: +8
Appendix - 112 -• G.B.T. TECHNOLOGY TRADING GMBH - GermanyWEB address : http://www.gigabyte.de• G.B.T. TECH. CO., LTD. - U.K.WEB address : http://ww
Hardware Installation - 12 -(Note 1) Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the
- 13 - Hardware Installation1-3 Installing the CPU and CPU Cooler1-3-1 Installing the CPUA. Locate the pin one (denoted by a small triangle) of the
Hardware Installation - 14 -B. Follow the steps below to correctly install the CPU into the motherboard CPU socket.• Before installing the CPU, make
- 15 - Hardware Installation1-3-2 Installing the CPU CoolerFollow the steps below to correctly install the CPU cooler on the CPU. (The following
Hardware Installation - 16 -1-4 Installing the MemoryIf two memory modules are to be installed, it is rec-ommended that you install them i
- 17 - Hardware Installation1-4-2 Installing a Memory NotchDDR3 DIMMA DDR3 memory module has a notch, so it can only t in one direction. Follow the
Hardware Installation - 18 -1-5 Installing an Expansion CardRead the following guidelines before you begin to install an expansion card:• Make sure
- 19 - Hardware Installation1-6 Setup of the ATI CrossFireX™ CongurationA. System Requirements - Windows 7, Windows Vista, or Windows XP operatin
MotherboardGA-790XT-USB3Dec. 21, 2009Dec. 21, 2009MotherboardGA-790XT-USB3
Hardware Installation - 20 -1-7 Back Panel Connectors PS/2 Keyboard and PS/2 Mouse Port Use the upper port to connect a PS/2 mouse and the lower po
- 21 - Hardware Installation Center/Subwoofer Speaker Out Jack (Orange) Use this audio jack to connect center/subwoofer speakers in a 5.1/7.1-channe
Hardware Installation - 22 -1-8 Internal ConnectorsRead the following guidelines before connecting external devices:• First make sure your devices a
- 23 - Hardware InstallationATX_12V_2X4:G.QBOFM1312412ATXATX:Pin No. Denition 13 3.3V 14 -12V 15 GND 16 PS_ON (soft On/Off) 17 GND 18 G
Hardware Installation - 24 -3/4/5) CPU_FAN/SYS_FAN1/SYS_FAN2/PWR_FAN (Fan Headers) The motherboard has a 4-pin CPU fan header (CPU_FAN), a 3-p
- 25 - Hardware Installation7) IDE (IDE Connector) The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before a
Hardware Installation - 26 -9) F_PANEL (Front Panel Header) Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor
- 27 - Hardware Installation10) F_AUDIO (Front Panel Audio Header) The front panel audio header supports Intel High Denition audio (HD) and AC&apo
Hardware Installation - 28 -Pin No. Denition 1 Power 2 SPDIFI 3 GND12) SPDIF_IN (S/PDIF In Header) This header supports digital S/PDIF In an
- 29 - Hardware Installation15) F_1394 (IEEE 1394a Header) The header conforms to IEEE 1394a specication. The IEEE 1394a header can provide one IEE
Copyright© 2009 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.The trademarks mentioned in this manual are legally registered to their respective
Hardware Installation - 30 -16) COM (Serial Port Header) The COM header can provide one serial port via an optional COM port cable. For purchasing t
- 31 - Hardware Installation18) BAT (Battery) The battery provides power to keep the values (such as BIOS congurations, date, and time information)
Hardware Installation - 32 -
- 33 - BIOS SetupBIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. Its majo
BIOS Setup - 34 -2-1 Startup ScreenThe following screens may appear when the computer boots.A. The LOGO Screen (Default)B. The POST Screen Function K
- 35 - BIOS Setup2-2 The Main MenuOnce you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use ar-row keys to mov
BIOS Setup - 36 - The Functions of the <F11> and <F12> keys (For the Main Menu Only) F11: Save CMOS to BIOS This function allows you
- 37 - BIOS Setup2-3 MB Intelligent Tweaker(M.I.T.)• Whether the system will work stably with the overclock/overvoltage settings you made is depen-d
BIOS Setup - 38 -CMOS Setup Utility-Copyright (C) 1984-2009 Award SoftwareAdvanced Clock Calibrationhigf: Move Enter: Select +/-/PU/PD: Value F10:
- 39 - BIOS Setup CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being used
- 4 -Table of ContentsBox Contents ...
BIOS Setup - 40 - CPU Host Clock Control, CPU Frequency (MHz), Set Memory Clock, Memory Clock The settings under the four items above are synchronou
- 41 - BIOS Setup CAS# latency Options are: Auto (default), 4T~12T. RAS to CAS R/W Delay Options are: Auto (default), 5T~12T. Row Precharge Time
BIOS Setup - 42 -******** System Voltage Optimized ******** System Voltage Control Determines whether to manually set the system voltage
- 43 - BIOS Setup NB/PCIe/PLL Voltage Control Allows you to set the North Bridge PCIe PLL voltage. Normal Supplies the North Bridge PCIe PLL
BIOS Setup - 44 - Date (mm:dd:yy) Sets the system date. The date format is week (read-only), month, date and year. Select the desired eld and use t
- 45 - BIOS Setup The following elds display your hard drive specications. If you wish to enter the parameters manually, refer to the information o
BIOS Setup - 46 -2-5 Advanced BIOS Features AMD C1E Support Enables or disables the C1E CPU power-saving function in system halt state. When enable
- 47 - BIOS Setup HDD S.M.A.R.T. Capability Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your hard dr
BIOS Setup - 48 -2-6 Integrated Peripherals OnChip IDE Channel Enables or disables the integrated IDE controller. (Default: Enabled) OnChip SATA C
- 49 - BIOS Setup AHCI Congures the SATA controller to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specica
- 5 -Chapter 3 Drivers Installation ...593-1 Installing Chipset
BIOS Setup - 50 - When a Cable Problem Occurs... If a cable problem occurs on a specied pair of wires, the Status eld will show Short and then len
- 51 - BIOS Setup ACPI Suspend Type Species the ACPI sleep state when the system enters suspend. S1(POS) Enables the system to enter the ACPI
BIOS Setup - 52 -(Note) Supported on Windows 7/Vista operating system only. PME Event Wake Up Allows the system to be awakened from an ACPI sleep
- 53 - BIOS Setup Hardware Thermal Control Enables or disables the CPU overheating protection function. When enabled, the CPU core voltage and ratio
BIOS Setup - 54 - Current Voltage(V) Vcore/DDR3 1.5V/+3.3V/+12V Displays the current system voltages. Current System/CPU Temperature Displays cur
- 55 - BIOS SetupPress <Enter> on this item and then press the <Y> key to load the safest BIOS default settings. In case system instabili
BIOS Setup - 56 -Press <Enter> on this item and type the password with up to 8 characters and then press <Enter>. You will be requested to
- 57 - BIOS SetupPress <Enter> on this item and press the <Y> key. This saves the changes to the CMOS and exits the BIOS Setup program. Pr
BIOS Setup - 58 -
- 59 - Drivers Installation3-1 Installing Chipset DriversChapter 3 Drivers InstallationAfter inserting the driver disk, "Xpress Install" w
- 6 -Box Contents GA-790XT-USB3 motherboard Motherboard driver disk User's Manual Quick Installation Guide One IDE cable Four S
Drivers Installation - 60 -3-2 Application SoftwareThis page displays all the utilities and applications that GIGABYTE develops and some free softw
- 61 - Drivers Installation3-4 ContactFor the detailed contact information of the GIGABYTE Taiwan headquarter or worldwide branch ofces, click the U
Drivers Installation - 62 -3-6 Download CenterTo update the BIOS, drivers, or applications, click the Download Center button to link to
- 63 - Unique Features4-1 Xpress Recovery2Chapter 4 Unique FeaturesXpress Recovery2 is a utility that allows you to quickly compress and b
Unique Features - 64 -Step 3:When partitioning your hard drive, make sure to leave unallocated space (10 GB or more is recom-mended; actual siz
- 65 - Unique FeaturesD. Using the Restore Function in Xpress Recovery2E. Removing the BackupF. Exiting Xpress Recovery2Select RESTORE to restore the
Unique Features - 66 -4-2 BIOS Update UtilitiesGIGABYTE motherboards provide two unique BIOS update tools, Q-Flash™ and @BIOS™. GIGABYTE Q-F
- 67 - Unique FeaturesB. Updating the BIOSWhen updating the BIOS, choose the location where the BIOS le is saved. The following procedure
Unique Features - 68 -Step 4:Press <Esc> and then <Enter> to exit Q-Flash and reboot the system. As the system boots, you should see the n
- 69 - Unique Features4-2-2 Updating the BIOS with the @BIOS UtilityA. Before You Begin1. In Windows, close all applications and TSR (Terminate and
- 7 -GA-790XT-USB3 Motherboard LayoutKB_MSCPU_FANSocket AM3ATXGA-790XT-USB3CD_INF_AUDIONECAUDIOPCIEX1_1IDEDDR3_1DDR3_3DDR3_2DDR3_4BATF_PANELF_1394F_US
Unique Features - 70 -Available functions in EasyTune 6 may differ by motherboard model. Grayed-out area(s) indicates that the item is not congurable
- 71 - Unique Features4-4 Easy Energy SaverGIGABYTE Easy Energy Saver is a revolutionary technology that delivers unparalleled power savings with a c
Unique Features - 72 -C. Stealth ModeIn Stealth Mode, the system continues to work with the user-dened power saving settings, even after the syste
- 73 - Unique Features4-5 Q-ShareQ-Share is an easy and convenient data sharing tool. After conguring your LAN connection settings and Q
Unique Features - 74 -4-6 Time RepairBased on the Microsoft Volume Shadow Copy Services technology, Time Repair allows you to quickly back up and res
- 75 - AppendixChapter 5 Appendix5-1 Conguring SATA Hard Drive(s)To congure SATA hard drive(s), follow the steps below: A. Install SATA hard driv
Appendix - 76 -B. Conguring SATA controller mode in BIOS SetupMake sure to congure the SATA controller mode correctly in system BIOS Setup.Step 1: T
- 77 - AppendixC. Conguring RAID set in RAID BIOSEnter the RAID BIOS setup utility to congure a RAID array. Skip this step and proceed with the inst
Appendix - 78 -Create Arrays ManuallyTo create a new array, press <2> to enter the Dene LD Menu window (Figure 4). The Dene LD selection from
- 79 - AppendixIn the following procedure, we'll create RAID 0 as an example.1. Under the RAID Mode section, press the <SPACE> key to sele
- 8 -Block Diagram(Note 1) For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in t
Appendix - 80 -Delete an ArrayThe Delete Array menu option allows for deletion of disk array assignments. Deleting an existing disk array could result
- 81 - AppendixStep 2: Save changes and exit BIOS Setup.5-1-2 Conguring JMicron JMB362 SATA ControllerA. Installing SATA hard drive(s) in your compu
Appendix - 82 -C. Conguring a RAID array in RAID BIOSEnter the RAID BIOS setup utility to congure a RAID array. Skip this step and proceed to the in
- 83 - AppendixCreate a RAID Array:In the main screen, press <Enter> on the Create RAID Disk Drive item. Then the Create New RAID screen appears
Appendix - 84 -3. Assign Array Disks: After a RAID mode is selected, RAID BIOS automatically assigns the two hard drives installed as the RAID drives
- 85 - AppendixWhen nished, the new RAID array will be displayed in the RAID Disk Drive List block (Figure 8).Figure 8 Model Name RAID Level Ca
Appendix - 86 - Model Name RAID Level Capacity Status Members(HDDx)RDD0: GRAID 0-Stripe 240 GB Normal 01[fgTAB]-Switch Window [hi]-Sele
- 87 - Appendix5-1-3 Making a SATA RAID/AHCI Driver Diskette (Required for AHCI and RAID Mode)To successfully install operating system onto SATA h
Appendix - 88 -Figure 3In Windows mode: Steps: 1: Use an alternative system and insert the motherboard driver disk.2: From your optical drive folder
- 89 - Appendix5-1-4 Installing the SATA RAID/AHCI Driver and Operating SystemWith the SATA RAID/AHCI driver diskette and correct BIOS settings, you
- 9 - Hardware Installation1-1 Installation PrecautionsThe motherboard contains numerous delicate electronic circuits and components which can
Appendix - 90 -For the JMicron JMB362:Insert the oppy disk containing the SATA RAID/AHCI driver and press <S>. Then a controller menu similar t
- 91 - AppendixStep 2: Insert the motherboard driver disk (Method A) or the removable storage device such as USB ash drive that contains the SATA RAI
Appendix - 92 -Step 3: When a screen as shown in Figure 6 appears, select AMD AHCI Compatible RAID Controller and press Next. Step 4: After the driver
- 93 - AppendixFor the JMicron JMB362:Step 1: Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps
Appendix - 94 -Step 3: When a screen as shown in Figure 10 appears, select GIGABYTE GBB36X Controller and click Next.Step 4:After the driver is loaded
- 95 - AppendixStep 1: Enter the login ID and password (default: "admin"), and then click Sign in to launch AMD RAIDXpert.Step 2: Select the
Appendix - 96 -For the JMicron JMB362:Turn off your computer and replace the failed hard drive with a new one. Use either the RAID setup utility or th
- 97 - Appendix• Rebuilding in the operating systemMake sure the JMicron JMB362 SATA controller driver has been installed from the motherboard driver
Appendix - 98 -5-2-1 Conguring 2/4/5.1/7.1-Channel AudioThe motherboard provides six audio jacks on the back panel which support 2/4/5.1/7.1-chan
- 99 - AppendixStep 2:Connect an audio device to an audio jack. The The cur-rent connected device is dialog box appears. Select the device according
Kommentare zu diesen Handbüchern